Here is the list of Network Firewall Top 15 Best Practices:

1. Default Denies All Traffic – Default denies all network traffic and allows only ports and services which are required.
2. Security Policy – An organization must have a written security policy and implement the same while doing firewall configuration.
3. Not use root id – Run the Firewall service as a unique user id instead of the administrator or root id.
4.  Passwords – Change default passwords for firewall devices. Also, change it periodically and take care of password strength.
5. Defense in depth – Never rely on packet filtering. Use other filtering techniques to protect IT infrastructure from malicious attacks.
6. Filter traffic – Filter packets based on source and destination addresses.
7. Physical Access – Control physical access to the firewall. This is obvious but should be strictly followed.
8. Patch management – Patch the firewall’s operating system and application software to get the vendor’s specific update.
9. Network Segmentation – Use network firewalls internally for segment networks. Also, implement a firewall to satisfy an organization’s security policy.
10. Security Audit – Conduct security tests against firewalls regularly and correct them on any issue.
11. Log Management – Always use a secure remote Syslog server. It helps to prevent the manipulation of logs by a malicious attacker.
12. Service Provider – Consider managed service providers for firewall management to get expertise in the field of firewall management services.
13. Change Management – Use change management practices for a network firewall. Document everything on changing any configuration.
14. Secure Desktops – All desktops should run a personal firewall in the network. This acts as an extra layer of security if your desktop or laptop using public wifi and is more susceptible to attack.
15. Backup – Regularly back up the firewall rule base and configuration files in read-only backup devices.

Conclusion

Installing a firewall does not make your data secure. Follow the best practices mentioned above while installing and operating a firewall.

The post Top 15 Best Practices of Network Firewall [Updated 2023] first appeared on All About Testing.

1. a hardware
2. a software
3. can be hardware as well as software
4. can neither be hardware nor a software

Q2. A proxy firewall filters at the?

1. physical layer
2. application layer
3. data link layer
4. network layer

Q3. A packet filter firewall filters at the

1. application or transport
2. data link layer
3. physical
4. network or transport layer

Q4. Which firewall facility can monitor the state of active connections and use this information to determine which network packets to allow through the firewall.

1. dynamic packet filter
2. general protection fault
3. partition
4. Gateway

Q5.  Which private data network uses the public telecommunication infrastructure, maintaining privacy through the use of a tunneling protocol and security procedures. 

1.  Metcalfe’s Law
2.  VPN
3.  DMZ
4.  personal firewall

Q6. DHCP is the abbreviation of

1. Dynamic Host Control Protocol
2. Dynamic Host Configuration Protocol
3. Dynamic Hyper Control Protocol
4. Dynamic Hyper Configuration Protocol

Q7. Which server acts as an intermediary between a workstation user and the Internet so that the enterprise can ensure security, administrative control, and caching service.

1. Kerberos
2.  security policy
3.  proxy server
4.  Metcalfe’s Law

Q8. Which software application is used to protect a single Internet-connected computer from intruders.

1. personal firewall
2. Bastion host
3. sniffer
4. Web Proxy Autodiscovery

Q9. Which is the only host computer that a company allows to be addressed directly from the public network — it is designed to screen the rest of its network from security exposure.

1. personal firewall
2. bastion host
3.  sniffer
4. D. Web Proxy Autodiscovery

Q10. Which set of rules governs what is and what is not allowed through the firewall? 

1.  Web Proxy Autodiscovery
2.  rule base
3. dynamic packet filter
4.  general protection fault 

The post Network Firewall first appeared on All About Testing.

Types of Firewall

1. Dedicated hardware appliances are generally used in data centers.
2. Software on a machine as used by home users. e.g., Windows Firewall
3. Managed firewall services have many options, including a premises-, network-, or cloud-based service. In this case, the firewall manufacturer or service provider takes care of the network and is responsible for firewall administration, log monitoring, etc.

Firewall based on Filtering Type:

1. Packet Filtering: As the name suggests, the user can either allow or drop packets based on source and destination IP, IP protocol ID, etc., from entering the internal network. This type of filtering works at the network transport layer.
2. Proxy: It offers more security than other types of filtering. In proxy filtering, the client connects with a proxy instead of a target system and initiates a new connection. This makes it harder for an attacker to discover the network, as they are not getting the response from the target system.
3. Stateful Inspection: In this type of inspection, systems maintain a state table (maintains active connections), analyze incoming and outgoing packets, and drop accordingly.

How does a firewall work?

A firewall works solely on defined network rules set by the network administrator. Network rules are different for inbound and outbound traffic. Inbound refers to Internet traffic, while outbound refers to traffic from inside. Inbound traffic rules include block requests based on service port number, source IP address, whether logs should be captured or not, etc. Outbound traffic rules include destination IP, local source IP, time, server port number, etc.

Conclusion

A firewall is one of the important devices that contribute a lot to network security. In this article, I have covered the basics of the firewall. If you are interested to know the 10 Best Free Firewalls for Windows Click Here.

The post Top Facts you should know about Network Firewall [Updated 2023] first appeared on All About Testing.

Q1. What is Network Security?

Ans: 

Network security is securing IT infrastructure from unauthorized access, misuse, malfunction, modification, destruction, or improper disclosure. IT infrastructure includes firewalls, routers, switches, servers, Intrusion Detection System (IDS), Intrusion Prevention System (IPS), and other devices, which help in host software applications and systems.

In simple terms, network security refers to all activities related to protecting the confidentiality, integrity, and availability of an organization’s software and hardware assets.

Click Here to know Top 10 Tips for Securing SCADA Networks from Hackers

Q2. What is a Network Firewall?

Ans:

A network firewall protects your network from unauthorized access. It filters traffic based on the configuration set by the firewall administrator. The firewall basically performs two functions, block and permit traffic based on configuration. Firewalls can be both either hardware and software firewalls.

NMap is an open-source tool to audit network components for open ports and services. Click Here to know the Top 15 NMap Commands

Q3. How does a firewall work?

Ans:

The firewall filters network traffic based on the configuration set by the firewall administrator.  It can permit or block any port number, web application, and network-layer protocols based on secure configuration.

A simple analogy of a firewall is the security guard to secure the house. If some person is identified as unknown to the security guard, he or she stops from entering the house.

Common ports:

• 80  HTTP
• 443  HTTPS
• 20 & 21  FTP
• 23  Telnet
• 22  SSH
• 25  SMTP
• 110 POP3
• 123 NTP
• 161 SNMP

Q4. How can a firewall protect the IT infrastructure inside your organization?

Ans:

Firewalls are configured to protect IT infrastructure from any unauthorized access. It secures the network by implementing defined security policies, hiding and protecting your internal network addresses, and reporting threats and activities. It also provides audit logs related to network traffic to the firewall administrator, identifying the root cause of a security breach. Click here if you are interested in knowing the Top Facts You Should Know About Network Firewall.

Q5. Will IPSEC make firewalls obsolete?

Ans:

To discuss this question first, we need to understand what IPSEC (Internet Protocol Security) does. IPSEC provides host-to-host authentication and encryption. In simple terms, it provides a solution for the integrity and confidentiality of data exchanged over the Internet to end customers.

While the firewall is protecting the network without doing encryption and host-to-host authentication, it monitors the traffic and permits or blocks based on configuration. It means we need both IPSEC and firewalls, and we can think of combining firewalls with IPSEC-enabled hosts.

Q6. Where does a firewall fit in the security model?

Ans:

A security model is a scheme for specifying and enforcing security policies. Firewalls secure the network’s perimeters by implementing defined security policies, hiding and protecting your internal network addresses, and reporting threats and activities.

Q7. What is a VPN?

Ans:

VPN stands for Virtual Private Network. It provides a secure tunnel that protects your data from any intrusion. It is used to protect private web traffic from snooping, interference, and censorship. In simple terms, it established the connection between two private networks over the internet.

Types of VPN: Site-to-site VPN and Remote Access VPN.

Click here for the Top 15 Best Practices of Network Firewall

Q8. What are the types of firewalls?

Ans:

The National Institute of Standards and Technology (NIST), an organization from the US, divides firewalls into three basic types: Packet filters, Stateful inspection, and Proxy.

Packet filters permit or block packets based on port number, protocol source, and destination address.

Stateful inspection works on the principle of the state of active connections between client and server. It uses state information to allow or block network traffic.

Proxy firewall combines stateful inspection technology to enable deep packet inspection. Here, the firewall act as a proxy; a client makes a connection with the firewall, and then the firewall makes a separate connection to the server on behalf of the client.

Q9. What is source-routed traffic and why is it a threat?

Ans:

Source routing is not very much used in practice. It allows a sender of a packet to partially or completely specify the route the packet takes through the network.

Generally, the router decides the route from destination to source. If source-routed traffic allows through the firewall, an attacker can generate traffic claiming to be from a system “inside” the firewall. In general, such traffic wouldn’t route to the firewall properly, but with the source routing option, all the routers between the attacker’s machine and the target will return traffic along the source route’s reverse path. Implementing such attacks are quite easy. Therefore it is a big threat to firewall devices.

Q10. What is IP spoofing and how can it be prevented?

Ans:

IP spoofing is a practice where an attacker illicitly impersonates another machine by manipulating IP packets. There are many tools available for IP Spoofing.
It can be prevented in the following ways:

• Invest in spoofing detection software
• Implement best security practices for IT assets
• Choose reliable ISP
• Implement Cryptographic protocols such as HTTP Secure (HTTPS), Secure, etc.
• Shell (SSH) and Transport Layer Security (TLS)
• Avoid Direct IP user authentication

Fortinet Firewall Interview Questions – Click Here

Q11. What is a Host-based Firewall?

Ans:

• These are personal firewalls running on your desktops and laptops as software.
• Firewall software is generally included in your operating system and is also available externally as a 3rd party solution.
• The main objective of the personal firewall is to stop unauthorized access to the network.
• These firewalls are generally “Stateful” firewalls and block connections based on port numbers.
• These firewalls are also used to block applications based on your configuration.
• The best example is the Windows Firewall, which works based on port number, application, and other attributes.

Q12. Whether a firewall is able to block some specific pages in a web application?

Ans: The answer is big Yes

• With the firewall’s help, you can allow or disallow applications such as MS SQL Server, Twitter, Facebook, and a subset of the application.
• Example: Suppose you can log in on Facebook but not post on Facebook because the firewall blocks the post feature on Facebook. Your firewall exactly knows what request you are sending to the Internet.

Q13. What are SOHO firewalls?

Ans:

• It is abbreviated as Small Office/Home Office appliance. It usually provides multiple functions with many security features including a wireless access point, Router, Firewall, and Content filter.
• It may not be able to provide advanced features of Dynamic Routing and Remote support.

Q14. What is Unified Threat Management (UTM)?

Ans: 

• It is also called the All-in-one security appliance and Web Security Gateway.
• These devices generally have a lot of security features such as URL filtering/content filtering, malware inspection (based on Malware signatures), spam filter, CSU/DSU built-in functionality, also act as router/switch, firewall functionality built-in, IDS/IPS capability, Bandwidth shaper may act as a VPN endpoint.

Q15. What is the limitation of the network firewall?

Ans: 

• It acts as the first line of defense against any external attack. However, it is weaponless against any internal attack.
• The firewall acts as a gatekeeper, but inside the house, it can’t stop any system harm. A firewall basically designs to protect the network from other networks.

Q16. What is the packet filtering firewall?

Ans: 

In simple words, a packet-filtering firewall filters traffic based on packet attributes such as source and destination addresses, source and destination port numbers, and protocol types.

Q17. One type of firewall is a circuit-level gateway, can you explain it?

Ans: 

Circuit-level gateway, as the name suggests, allows or drops connection based on creating a connection between destination and host. It involves monitoring TCP/IP session requests between trusted LAN hosts and non-trusted Internet hosts. It verifies TCP/IP connection procedure, also called handshaking, and the validity of the connection.

Q18. Which type of firewall is more secure, packet filtering firewall and circuit-level gateway, and Why?

Ans: 

Circuit Level Gateway is considered more secure because Packet-filtering solutions filter traffic based on packet attributes, as discussed in the previous question. Circuit Level Gateway filters are based on the communication pattern of TCP/IP packets.

Packet-filtering solutions open the system to denial-of-service (DoS) attacks (buffer overflow exploits in “allowed” applications on target machines, connections exhaustion).

However, Circuit Level Gateway filters are also not able to protect the system from DoS attacks completely.

Click Here to know more about the 30 points checklist to audit the Firewall

Q19. What is the application Level gateway in the context of a network firewall?

Ans:

• In this case, the firewall act as a proxy between the internal client and the external server. The main purpose of this type of firewall is to monitor and sanitize external communications.
• Whenever a user requests something from the Internet, a firewall creates another similar request and checks whether the request resources do not have any malware or other security vulnerabilities.

Q20. What is a Stateful Inspection Firewall?

Ans:  

Stateful inspection is the most effective way to secure a network. It combines the features of the packet filtering firewall, Circuit Level Gateway, and Application Level Gateway.

Q21. What are the attack methods on the network?

Ans: 

Some common attack methods are ping sweep, port scan, email reconnaissance, IP spoofing, DDoS attack, packet sniffing, DNS transfer, Trojan horses, backdoors, spyware, etc.

Q22. Explain the concept of IP spoofing.

Ans:  

Here, the attacker used this technique to hide the actual IP. They send malicious traffic from fake IPs or spoof IPs. This is the challenge for security experts and law enforcement agencies to find the actual attacker. DDoS is the most popular attack using this technique.

The post Top 22 Interview Questions: Network Firewall [Updated 2023] first appeared on All About Testing.