1. Display traffic to and from 192.168.65.129

ip.addr == 192.168.65.129

2. Display tcp and dns packets both

tcp or dns

3. Display traffic with source or destination port as 443

tcp.port == 443

4. tcp.analysis.flags

5. display all protocols other than arp, icmp and dns

!(arp or icmp or dns)

6. Show traffic which contains google

tcp contains google

7. Display http response code of 200 in network traffic

http.response.code == 200

8. Display http request

http.request

9. tcp.flags.syn

10. Show only SMTP (port 25) and ICMP traffic:

 tcp.port eq 25 or icmp

11. Show only traffic in the LAN (192.168.x.x), between workstations and servers -- no Internet:

ip.src==192.168.0.0/16 and ip.dst==192.168.0.0/16

12. TCP buffer full -- Source is instructing Destination to stop sending data

 tcp.window_size == 0 && tcp.flags.reset != 1

13.Filter on Windows -- Filter out noise, while watching Windows Client – DC exchanges

 smb || nbns || dcerpc || nbss || dns

14. ! ( ip.addr == 192.168.65.129 )
which is equivalent to
 ! (ip.src == 192.168.65.129 or ip.dst == 192.168.65.129)

This translates to “pass any traffic except with a source IPv4 address of 192.168.65.129 or a destination IPv4 address of 192.168.65.129”

15.Some filter fields match against multiple protocol fields. For example, “ip.addr” matches against both the IP source and destination addresses in the IP header. The same is true for “tcp.port”, “udp.port”, “eth.addr”, and others. It’s important to note that
 ip.addr == 192.168.0.100
is equivalent to
ip.src == 192.168.0.100 or ip.dst == 192.168.0.100

 16. Filter out any traffic to or from 10.43.54.65
 ip.addr != 192.168.0.100
which is equivalent to
ip.src != 192.168.0.100 or ip.dst != 192.168.0.100

17. This translates to “pass all traffic except for traffic with a source IPv4 address of 10.43.54.65 and a destination IPv4 address of 10.43.54.65”, which isn’t what we wanted.  ! ( ip.addr == 10.43.54.65 )
which is equivalent to
! (ip.src == 10.43.54.65 or ip.dst == 10.43.54.65)

This translates to “pass any traffic except with a source IPv4 address of 10.43.54.65 or a destination IPv4 address of 10.43.54.65”.

The post Wirshark : Top 17 Display Filters first appeared on All About Testing.